Understanding Different Hydraulic Hose Fittings

Image result for Different Hydraulic Hose Fittings

A hydraulic system, by design, works under intense pressure to transport liquids or gases. Within the system, different materials are used for pipes and connectors that meet strict standards to ensure the system is safe and effective. Different hydraulic hose fittings can be purchased depending on the connection type and the material it contains.

Compression Fittings

Compression fittings include standard, bite-type, mechanical grip and flare fittings. With these fittings, compression is the connector. They are easily connected and disconnected and work well in tights spaces or when there are different materials being connected.

Crimp Fittings

These inexpensive connectors are permanent. A special tool is used and a trained installer crimps the connection into the hose material so that the connector cannot be removed again.

End Fittings

These fittings include plain ends and clamp ends and hoses can be connected by glue, welded or attached by other various adhesive materials.

Flange Fittings

These are mostly used for nozzles and valves, flange fittings join materials through threads, bolts, clamps and wedges. The ends are compressed together to join. In most cases a washer, o-ring or gasket is placed in-between the connectors to stop any leaks.

Push-to-Connect Fittings

With push-to-connect fittings, the hose is inserted into the fitting and can be released again with ease. Contrary to crimped fittings, any hose that requires frequent connection and disconnection should be held with a push-to-connect fitting. Using any other fitting will introduce major wear and tear on the connectors and hose and could shorten the life of the materials and cause a safety hazard.

Threaded Fittings

With threaded fittings the connectors are screwed together. If a tight seal is required so liquids or gases cannot leak the connector should have tapered threads. Tapered threads creates a tight seal. Additionally, tape or Teflon on the threads can be added for an even more secure seal.

When looking for hydraulic hose fittings fort worth tx the proper fitting should be chosen based on the job being performed. Experts can help choose the correct fitting. Special care should be taken with any hydraulic system due to the pressure it contains. Safety should be priority number one.